Print

Energy Tips and Advice

May 03

Reduce your costs with these top tips for energy efficiency. Give your business the edge by reducing costs and taking small steps in energy efficiency that could have a big impact on your energy costs.

Keep your temperature under control

Our Top 6 Tips for Heating and Ventilation Savings

  1. Never block radiators or any other heating surfaces
  2. Match heating levels with building occupancy times
  3. Ensure that air conditioning is never running at the same time as heating
  4. Do not heat buildings above their required level
  5. Fit radiators with thermostatic valves which are not controlled by an external system
  6. Staff should be encouraged to close windows to minimise draughts when the heating system is active

Save up to 10% on heating costs by reducing the temperature by 1°C

Get out of hot water

Our 6 Best Boiler Tips for Savings

  1. Clean and service your boiler regularly
  2. Make sure that boilers and pilot lights are turned off when there is no demand for heating in work areas
  3. Ventilate the boiler house adequately to ensure that there is enough air for combustion to take place efficiently
  4. Consider the installation of an economiser to recover heat from the flue gases
  5. Insulate all boilers as well as distribution pipes and valves
  6. Fit sequencing controls where there is more than one boiler

Ensure your hot water is set to 60°C to minimise waste

 

Lots to save for the office, nothing to lose

Our top 5 Office Equipment Savings Tips

  1. Switch off monitors at night and lunch times and shut down computers at the end of each working day
  2. Turn off photocopiers every night
  3. Place photocopiers outside of air-conditioned areas as they represent a considerable heat gain
  4. Vending machines and water coolers should be turned off every night and at weekends
  5. When purchasing office equipment consider the energy efficiency rating of the product

Our simple tips can help you cut your energy consumption by up to 20%

 

A/C updates for cooler consumption

6 Steps to Keeping it Cool with Refrigeration Savings

  1. Check that there are no bubbles in the refrigerant sight glass and that the oil in sight glass is at its correct level
  2. Make sure that no product is stacked near or in front of the evaporator as this obstructs the airflow
  3. Evaporators should be checked to make sure they defrost properly
  4. Assess the temperature in the store and make sure that the unit is not any colder than it needs to be
  5. Minimise all heat sources such as lights and forklifts in the cold stores
  6. Fit all dairy walls with night blinds

Energy Consumption can increase by over 50% if an air conditioning system is poorly maintained

 

Keep it compact and don't be afraid of the dark

 

Our Top 7 Tips for Lighting Savings

  1. Clean light fittings regularly
  2. Increase the number of switches that service large banks of lights
  3. Fit all outdoor lighting with photosensitive controls
  4. Reduce lighting levels in little-used areas such as corridors and stores
  5. Replace all tungsten filament bulbs with compact fluorescent bulbs
  6. Replace old ballasts with modern high frequency electronic ballasts
  7. Consider fitting presence detectors to infrequently occupied areas

Switching off lights in unused areas can reduce your lighting costs by as much as 15%, while compact flourescent lamps can use up to 75% less energy than standard light bulbs.

Load More

Back to Top

Comments

Blog post currently doesn't have any comments.

Leave comment

  • Security code